230 volt actuator 2 wire/normally closed. Fits majority of manifolds thanks to the M30 thread and 5mm of maximum travel.
Heatmiser UH8-N 8 Zone Low Voltage Wiring Centre
Reference: UH1
The UH8-N is designed to be used in conjunction with our 12v network thermostats.
Free Shipping on all orders over £350
50 Guarantee on Pert-al-Pert Pipe
SAME DAY CAD DESIGN SERVICE
The UH8-N is designed to be used in conjunction with our 12v network thermostats.
The UH8-N provides central switching and is therefore ideally situated next to the underfloor heating manifold. Eight zones can be controlled as well as providing an output for a hot water cylinder.
On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to six actuators can be connected to each zone. An option is provided to turn zone 8 into a radiator zone. In this mode, the underfloor heating pump, valve and boiler are not enabled when there is a call for heat from zone 8. The UH8-N provides a network port allowing connection to our network products, including the Central Touchpad.